New Speedometer LCD Display,Adjustable ONE-LIN Communication for Electric Bicycle,Compatible with Fardriver Controller

- Function Settings - 【1】After power on, the self-test of the display is completed, then press and hold the left button for 10 seconds to enter the background and enter the password; 【2】 Left-click to adjust data, right-click to shift; 【3】 Password 153, set the perimeter(mm), the number of motor pole pairs, the offset, the unit mm is CC 1413mm (18inch tire perimeter) by default, after the setting is completed, long press the right button to enter the number of motor pole pairs(PL 24-10, pole pair number 24 by default) and offset(10); 【4】 Password 256, high and low gear (E, S gear) and normal gear selection, -2 is high and low gear, -0 is normal gear display; 5) Password 372, clear ODO, limited to 3 times; 6) Password 856, 48V, 60V, 72V, 96V for selection, synchronized with the grid number, the lithium battery automatically takes the SOC, and automatically switches. If the lithium battery is changed to the other battery, and it must be powered on again; 【7】Password 879, fixed voltage calibration, 48V, 60V, 72V, 96V, corresponding to the volatge setting; 【8】Password 824, self-input voltage calibration; 【9】Password 974, KMH/MPH switch setting; 【10】Password 928, D gear light, N gear light off setting, can be turned off when only the liquid crystal display gear is needed. 【11】Password 919, to change the value of full voltage and undervoltage. Front is fullvoltage, back is undervoltage

• 【Attention】Only Use for Fardriver Controller
• 【Note】This product does not support plug and play, you need to connect the vehicle function harness yourself
• 【Multifunctional】Supported adjustment parameters include: voltage, motor pole pairs, tire circumference, km/h/mile/hour
• 【Service】If you have any questions about the product, please contact us